www.cynergy3.com ? 2017 cynergy3 components, all rights reserved. specifications are subject to change without prior notice. cynergy3 components and the cynergy3 components logo are trademarks of cynergy3 components limited. iso 9001 certified cynergy3 components ltd. 7 cobham road ferndown industrial estate wimborne, dorset 21 7 bh pe SC-ISOSLICE-7 2017 telephone +44 (0) 1202 897969 email:sales@cynergy3.com made in the uk SC-ISOSLICE-7 isolated bus i/o module 2 off frequency inputs or 1 off pulse counting input multiple inputs in one module very high accuracy, low cost communicates to ethernet / rs232 or rs485 network via an sc-e-100 unit input/output/power supply isolation automatic bus & power connection via din rail bus connector the SC-ISOSLICE-7 isolated bus i/o module combines full three-port isolation with access to an industrial bus. this bus connects to the sc-e-100 modules which are then used to transmit the process values via either an ethernet or a rs232/485 wired communications network. full 3-port isolation is standard but for channel to channel isolation please see the sc-isoslice-1. the frequency or pulse counting input type can be switched using internal dip switches for either volt-free contact inputs or voltage level inputs. the two frequency input values or one pulse counting total can be read from internal modbus registers. the units have a wide ranging 12 to 36 vdc. this supply can either be wired to the appropriate terminals or picked up automatically from the bus connector. input types for SC-ISOSLICE-7 frequency inputs x 2 or pulse counting input x 1 the type of digital input can be selected using internal dip switches. typical inputs are volt free contacts or 0-24 volt the standard maximum frequency is 10khz per channel but higher frequencies may be available, please enquire. outputs for output modules see sc-isoslice-6 or sc-isoslice-8 technical specifications parameter min typ max comments supply voltage 12v 24v 36vdc supply current (ma) 45 90 for 24vdc supply (260ma for 50ms on start-up) bus connection 16-bit bus connection temp coefficient 50ppm/oc time constant (10-90%) 60ms (normal) 200ms for reading update operating ambient 0oc 55oc relative humidity 0% 90% isolation voltage 1kv see note surge voltage 2.5kv for 50s transient of 10kv/s notes absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. device is protected against reverse polarity connection. accuracy figures based on 24vdc supply, 4-20ma output with 250 load and an ambient 20oc. installation data mounting din rail ts35 orientation any connections screw clamp with pressure plate conductor size 0.5-4.0mm insulation stripping 12mm weight approx 95g ordering information part no.: SC-ISOSLICE-7 part number universal inputs ma or v inputs rtd inputs t/c inputs analogue outputs digital inputs digital outputs sc-isoslice-1 2 sc-isoslice-2 8 sc-isoslice-3 4 sc-isoslice-4 4 sc-isoslice-5 8 sc-isoslice-6 4 SC-ISOSLICE-7 2xfreqin sc-isoslice-8 4 sc-isoslice-9 4 x ac i/v
|
